Showing 65–80 of 82 results
Replacement or spare RSS Batten. Indestructible polycarbonate Batten that is inserted into pockets on the rails of the board for increased stiffness. Only compatible with Red Paddle Co Boards with RSS Batten pockets.
The Rocker Stiffening System battens make the board up to 40% stiffer. Here is our video and some tips on how to make working with your battens easier: https: redpaddleco.com en-gb paddle-boarding-know stiffening-up -Inflate board to 1-5psi when fitting or removing the batten. – When fitting or removing the battens, put the board on its…
The RSS velcro tabs are attached to our RSS battens to assist in fitting and removing the battens from the board pockets. Here is our video and some tips on how to make working with your battens easier: https: redpaddleco.com en-gb paddle-boarding-know stiffening-up -Inflate board to 1-5psi when fitting or removing the batten. – When…
The hose fits on our Titan pump, Ezee pump and HP pump. It has a Halkey Roberts adapter on one end which connects to the board valve. The black end that connects to the pump uses a screw thread to secure it in place.
This hose will fit your Titan 2 pump with twin HR adaptor.
Inside all Red Paddle Co pumps are at least 2 Non Return Valves. If your pump is feeling bouncy when you push down on the handle then you may need a new Non Return Valve. We recommend you buy two or more to ensure you always have a spare. How do you change the Non…
The secret to our Titan pump is in the dual-chamber system and high-flow handle which pump air into your board at up to 60mph, ensuring it inflates to the recommended pressure level while using less energy.
The Titan pump is designed for disassembly which facilitates replacing certain parts if necessary. This handle will fit the fine thread piston rods. To check which handle you need, please see image showing the coarse thread piston rod on the left and the fine thread on the right and then follow these steps to identify…
The Titan Pump s double chamber feature will cut your pumping time in half. At around 10psi pumping might become a little tougher; this is when you can remove the red isolation cap to use the high pressure chamber on its own (the smaller one) to make things a lot easier!
Our Red Paddle Co black plastic fin is supplied with a nut and bolt connection to ensure a 100% secure hold is compatible with all US fin boxes. This fin is supplied with our windsurfing boards; the 10 7 Wind comes with a set of two and the 10 7 Windsurf comes with one, along…
This is the standard US fin box that is used on our boards. It houses any US fin with a base measurement of 20cm 7 or less. NB: see fin box repair patch for fin box repairs
Our Red Paddle Co race fin comes with all of our race boards: our Elite boards and our race boards from previous years. This fin uses a quick-fit nut and bolt system to ensure a 100% secure hold and is compatible with all US fin boxes. It is also supplied in a protective pouch. Fin…
Single Red Paddle Co 8 red touring fin for our Voyager range. The Voyager board range features a twin fin set up which improves tracking and glide. By having two shorter fins rather than one long fin, you ll be able to get into much shallower waters, opening up a wider variety of waterways to…
End of content
End of content
No products in the cart.
